Raised-panel steel
Carriage house
Modern flush
Full-view glass
LiftMaster openers
Chamberlain openersFull 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterPanel Replacement in San Francisco, CA
Garage door panel replacement in San Francisco typically costs between $250 and $800 per panel, depending on the door material, panel size, and whether the damage is isolated to a single section or spread across the door. Most panel replacements in the city are completed in one visit, usually within two to three hours, after we check roller condition as part of the job. If you’re dealing with a dented, cracked, or weather-damaged panel, call Doyle Garage Doors San Francisco at (650) 550-9734 and we’ll tell you exactly what it will cost before we touch the door.
Replacing a section of your garage door is often the smarter repair than replacing the entire door. A single damaged panel doesn’t usually compromise the whole system, and swapping it out keeps your existing tracks, springs, and opener working as they should. We’ve been doing this work in San Francisco since 2001, and our Garage Door Repair team has seen every kind of panel damage the city’s hills, tight garages, and coastal air can produce. For the full picture of what we do, see our Garage Door Repair in San Francisco page.
When You Need Panel Replacement
Not every dent means a new panel. Here are the situations where panel replacement is the right call, based on what we see across San Francisco neighborhoods from the Sunset to Bernal Heights:
- Impact damage from a car or bike. A low-speed bump in a tight Richmond District garage can crease a steel panel past the point where reshaping makes sense. Once the metal is folded, the panel loses structural integrity.
- Rust and corrosion through the panel. Homes in the Outer Sunset and Richmond sit in salt-heavy fog for months each year. We regularly replace bottom panels on steel doors that have rusted through from years of damp air and street runoff.
- Warping on wood doors. Wood panels in older Victorians and Edwardians throughout the Mission and Noe Valley absorb moisture and bow over time. A warped panel binds against the track and strains the opener motor.
- Broken window inserts or frame damage. Panel sections with glass can crack along the frame, especially on aluminum doors manufactured by Amarr or Wayne Dalton. When the frame is bent, replacing the glass alone won’t hold.
- Bottom panel rot or water damage. The lowest section of the door sits closest to the ground. In garages with poor drainage, that panel deteriorates first, and it’s usually not worth patching.
- Single-panel replacement after an accident. If a moving truck or delivery van clipped the door, you might only need one section replaced rather than an entire door swap. We’ll tell you honestly if the rest of the door is still serviceable.
Our Panel Replacement Process
Here’s exactly how a panel replacement works when you call Doyle Garage Doors San Francisco:
- You call, a person answers. Whether it’s 2 p.m. on a Tuesday or 3 a.m. on a holiday, the phone at (650) 550-9734 is answered by someone who works here. You’ll describe the damage and we’ll schedule a visit.
- We send you the technician’s name and photo before arrival. Before the tech pulls up to your home, you’ll know exactly who to expect. This is our Threshold Standard, and it applies to every visit with no exceptions.
- The technician inspects the door and verifies their identity at your door. Our tech arrives in a clean marked uniform, shows a photo ID badge, and walks you through what they’re seeing: which panel needs replacing, why, and whether the springs or tracks were affected too.
- You get a written price before any work starts. The number on that sheet is the number you pay. No verbal estimates followed by surprise line items. If we find additional damage during the job, we stop and show you the revised written price before proceeding.
- We replace the panel, matching the door as closely as the manufacturer allows. For a Craftsman or Raynor door, we order panels through factory channels to keep the color, texture, and thickness consistent. Older doors may show slight color variation due to sun fading, and we’ll tell you that upfront.
- We test the full door cycle and hand you a written 365-day guarantee. Every repair gets the Done Right Promise in writing: 365 days from the date of repair, if it fails, we come back and make it right at no charge.
Panel Replacement Pricing in San Francisco
Here’s what panel replacement typically costs in San Francisco, based on the jobs we’ve done across the city. These are honest ranges, not bait prices:
- Single steel panel replacement: $250 – $450, depending on panel width (8′ vs. 16′ door) and insulation.
- Single wood panel replacement: $350 – $650, including paint or stain matching where possible.
- Aluminum or glass panel replacement: $400 – $800, depending on glass type and frame condition.
- Bottom panel with weatherstripping replacement: $300 – $550, including new seal and hardware.
- Multiple panel replacement (2 – 3 sections): $500 – $1,200. At this point, we’ll give you a straight comparison against a new door, because sometimes replacement is the better investment.
What drives the price? Panel material is the biggest factor, followed by door age and brand. A current-model Amarr panel is easier to source and match than a discontinued 1990s design. Labor stays consistent because we never cut corners on how the panel is seated, balanced, and tested. Every estimate is free, and every price is in writing before work begins. Call (650) 550-9734 for your exact number.
FAQs – Panel Replacement
Is it cheaper to replace a panel or the whole garage door?
Replacing one or two panels is almost always cheaper than a full door replacement, typically running $250 to $650 per panel versus $1,500 to $4,000 for a new door in San Francisco. However, if your door is over 20 years old, has spring damage or track issues, or the panel style has been discontinued, a new door may be the better long-term investment. We’ll show you both numbers in writing and let you decide with no pressure. Call (650) 550-9734 for an honest comparison, free.
Can you replace a garage door panel the same day?
Yes, in most cases we can replace a damaged panel on the same visit, as long as the panel is in stock or available through our local distributor network. Common steel panels for Wayne Dalton and Amarr doors are frequently available same-day, and we include sensor calibration if needed. Discontinued or custom order panels take 1 – 2 weeks. When you call (650) 550-9734, we’ll tell you the timeline before you book.
Will a new panel match the rest of my garage door?
A factory-ordered panel from the same manufacturer will match closely, but sun exposure and weather will make an older door look slightly different from a brand new section. We don’t hide that from you. If the color difference would bother you, we can discuss painting or replacing additional panels, and we’ll put those options in writing before any work starts.
Do you replace panels on all garage door brands?
We’re factory-trained on all major brands, including Craftsman, Raynor, Amarr, and Wayne Dalton. Aaron Teague, our owner, has been overseeing garage door work in San Francisco since 2001, and our technicians see these doors every day. If your panel is discontinued, we’ll source a compatible replacement or present a full-door option with honest pricing. Call (650) 550-9734 and tell us the brand and year of your door.
Does panel replacement come with a guarantee?
Every panel replacement includes our 365-Day Done Right Promise in writing. If the repair fails within 365 days of the date of repair, we come back and make it right at no charge. You also get a free second visit if the repair fails, covered automatically with no argument required. That’s the standard for every job in San Francisco.
Written by Aaron Teague, Owner at Doyle Garage Doors San Francisco, serving San Francisco.